1. Forum
  2. Fidonet
  3. MYSTIC

  • Issue

    From IB Joe@1:342/200 to All on Fri Oct 20 12:44:02 2023
    I have double checked, and re-cheched my setup. I have an issue... When I am on the BBS posting an ANSI file manually to a message it posts perfectly like it should...

    BUT... When I try to post the same file with mutil in an auto post it gets screwed up... It looks like Mystic is auto wrapping the lines that exceed the 80 columns...
    I thought I was able to do it before... I see others doing it... WHY!!! can't I do it... my next 2 messages will show you my problem

    IB Joe, Pronouns (FJB/LGB)
    AKA Joe Schweier
    SysOp of 4A 6F 65 73 42 42 53
    -=JoesBBS.com=-

    ... There is an exception to every rule, except this one.

    --- Mystic BBS v1.12 A49 2023/04/30 (Windows/64)
    * Origin: JoesBBS.Com, Telnet:23 SSH:22 HTTP:80 (1:342/200)
  • From Nicholas Boel@1:154/700 to IB Joe on Fri Oct 20 16:58:43 2023
    Re: Issue
    By: IB Joe to All on Fri Oct 20 2023 12:44 pm

    I have double checked, and re-cheched my setup. I have an issue... When I am on the BBS posting an ANSI file manually to a message it posts perfectly like it should...

    BUT... When I try to post the same file with mutil in an auto post it gets screwed up... It looks like Mystic is auto wrapping the lines that exceed the 80 columns... I thought I was able to do it before... I see others doing it... WHY!!! can't I do it... my next 2 messages will show you my problem

    It looks like when you post via mutil it's not adding "[ANSI]" to the subject line, so maybe mystic is either not detecting that it's an ANSI or
    it's processing it differently than when you upload it via the BBS.

    After actually looking at mutil.ini, it seems the stanza is called "[PostTextFiles]" and mentions nothing about ANSI. Also, whatsnew.txt doesn't mention anything regarding this stanza and posting ANSI files either. It may be possible it doesn't support doing that just yet, or was never intended to?

    Maybe others that actually use that stanza can chime in on this, though, as I see a lot of ANSI posts from other Mystic systems.

    Regards,
    Nick

    Regards,
    Nick

    ... All things are possible. Except skiing through a revolving door.
    --- SBBSecho 3.20-Linux
    * Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (1:154/700)
  • From Al@1:153/757 to Nicholas Boel on Fri Oct 20 17:35:30 2023
    Maybe others that actually use that stanza can chime in on this, though, as I see a lot of ANSI posts from other Mystic systems.

    I haven't tried to post an ansi with mutil for a long time.

    If I remember right mutil only posts the first 79 or 80 columbs of text and anything longer than that would simply be discarded. I found that to be the case with any text or ansi file. I always made sure that text was preformatted to fit in that before posting with mutil.

    It's been a very long time since I used mutil, I don't know if that is still the case today or not.

    --- BBBS/Li6 v4.10 Toy-6
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From IB Joe@1:342/200 to All on Wed Jul 30 11:25:17 2025
    Can someone call my system... with SSH and then TelNET

    I may be having an SSH Issue

    Thanx

    IB Joe, Pronouns (FJB/LGB)
    AKA Joe Schweier
    SysOp of 4A 6F 65 73 42 42 53
    -=JoesBBS.com=-

    ... Everyone is entitled to my opinion!

    --- Mystic BBS v1.12 A49 2023/04/30 (Windows/64)
    * Origin: JoesBBS.Com, Telnet:23 SSH:22 HTTP:80 (1:342/200)
  • From IB Joe@1:342/200 to All on Wed Jul 30 11:39:53 2025
    Scratching my head... I can get people to connect via SSH but not telnet.

    Maybe I'll have to look at things after I have a few beers

    IB Joe, Pronouns (FJB/LGB)
    AKA Joe Schweier
    SysOp of 4A 6F 65 73 42 42 53
    -=JoesBBS.com=-

    ... When all else fails, read the instructions

    --- Mystic BBS v1.12 A49 2023/04/30 (Windows/64)
    * Origin: JoesBBS.Com, Telnet:23 SSH:22 HTTP:80 (1:342/200)
  • From Björn Wiberg@2:201/137 to IB Joe on Wed Jul 30 20:54:48 2025
    Hello IB Joe!

    On 30 Jul 2025, IB Joe said the following...
    Scratching my head... I can get people to connect via SSH but not telnet.

    Just tried, and Telnet worked fine from here!

    Best regards
    Bj”rn

    --- Mystic BBS v1.12 A49 2024/05/29 (Linux/64)
    * Origin: Star Collision BBS, Uppsala, Sweden (2:201/137)
  • From IB Joe@1:342/200 to Björn Wiberg on Wed Jul 30 12:08:29 2025
    On 30 Jul 2025, Bj”rn Wiberg said the following...

    Just tried, and Telnet worked fine from here!


    Thanx

    Then it's the users issue

    IB Joe, Pronouns (FJB/LGB)
    AKA Joe Schweier
    SysOp of 4A 6F 65 73 42 42 53
    -=JoesBBS.com=-

    ... A SQL query walks into a bar and sees two tables. Asks: 'Can I join you?'

    --- Mystic BBS v1.12 A49 2023/04/30 (Windows/64)
    * Origin: JoesBBS.Com, Telnet:23 SSH:22 HTTP:80 (1:342/200)

Novedades:

Servidor de Quake 3 Arena Online! - Conectate a ferchobbs.ddns.net, puerto 27960 y vence con tu equipo!