• Re: Linux for old computer (very)

    From Wilfred van Velzen@2:280/464 to Benny Pedersen on Sun Dec 26 13:54:50 2021
    Hi Benny,

    On 2021-12-26 12:29:38, you wrote to Maurice Kinal:

    holland was underpowered last week, this leaded to no power 2 times
    with 15 min delay, it was realy low voltage in danmark, just not the
    whole danmark, most was limited to the connected cable to holland from danmark, while rest was no issue, funny problem :)

    We in the Netherlands didn't notice a thing...?

    Bye, Wilfred.

    --- FMail-lnx64 2.1.0.18-B20170815
    * Origin: FMail development HQ (2:280/464)
  • From Maurice Kinal@2:280/464.113 to Benny Pedersen on Sun Dec 26 13:15:13 2021
    Hey Benny!

    only problem with this is that pn50 is still under 65 watt,
    while above is over

    Says the guy who wants four 8k monitors. ;-)

    You are right though. The AC/DC brick it comes with can handle up to 90 watts. I am sure the 16 penguins are going to want their fair share when they require it. The same situation would exist on the pn50 if it would have supported the 4800u, which it doesn't.

    Given the target you specified, the additional wattage would be well spent methinks. As for 4 8k monitors I doubt that is doable (at this writing) no matter which system is to be deployed. 4 4k monitors, although I'd be happy with 1 ... I think ... 2 at most.

    most was limited to the connected cable to holland from danmark,
    while rest was no issue, funny problem :)

    You have a weird sense of humour.

    Life is good,
    Maurice

    ... Treow sceal on eorle, wisdom on were.
    Loyalty belongs in a warrior, wisdom in a man.
    --- GNU bash, version 5.1.8(1)-release (x86_64-motorshed-linux-gnu)
    * Origin: Little Mikey's EuroPoint @ (2:280/464.113)
  • From Gerrit Kuehn@2:240/12 to Benny Pedersen on Sun Dec 26 15:18:36 2021
    Hello Benny!

    26 Dec 21 12:37, Benny Pedersen wrote to Gerrit Kuehn:


    Bought a couple of PN51 lately. Not rolled out into production yet,
    but looks like a very nice mini-workstation or microserver solution.

    will freebsd run well on them ?

    Havn't tried. Intended for use with MX.


    Regards,
    Gerrit

    ... 3:18PM up 157 days, 9:09, 7 users, load averages: 0.43, 0.78, 0.80
    --- Msged/BSD 6.1.2
    * Origin: Ideas of lust and dying (2:240/12)
  • From Benny Pedersen@2:230/0 to Wilfred van Velzen on Mon Dec 27 04:45:42 2021
    Hello Wilfred!

    26 Dec 2021 13:54, Wilfred van Velzen wrote to Benny Pedersen:

    Hi Benny,

    On 2021-12-26 12:29:38, you wrote to Maurice Kinal:

    holland was underpowered last week, this leaded to no power 2 times
    with 15 min delay, it was realy low voltage in danmark, just not the
    whole danmark, most was limited to the connected cable to holland from
    danmark, while rest was no issue, funny problem :)

    We in the Netherlands didn't notice a thing...?

    good backup from danmark then :=)

    it happende 22:00 and 22:15 danish time

    i seldom have seen it happen, but i could see it was low voltage
    problem, nearly all things here shuts down as it was wanted, when
    the power was back my android tv turned back on as it was a
    planeed power on, hmm

    its dokumented on http energinet.dk search for power outtages


    Regards Benny

    ... too late to die young :)

    --- Msged/LNX 6.1.2 (Linux/5.15.11-gentoo-dist (x86_64))
    * Origin: gopher://fido.junc.eu/ (2:230/0)